Useful ideas

14 tips to help fix problem areas during repairs for a penny

Pin
Send
Share
Send
Send


14 tips to help fix problem areas during repairs for a penny

Every owner knows that when the time comes for repairs, some minor troublesome problems arise throughout the house, which takes a long time to resolve.

To facilitate this task, we have collected 14 penny tips that will help with the repair in the house.

1. Squeaky floor


Squeaky floorboards.

If the parquet began to crumble and squeak, talcum powder or baby powder will help to solve the problem for a while. Pour the powder in the gap between the boards. This is a temporary, but very effective measure that will get rid of annoying sound.

2. Rusted hinges

Squeaky hinges.

Spray oil for baking can be used to lubricate squeaky hinges. Also for these purposes you can use a canister WD-40. However, remember that such manipulations are only a temporary solution to the problem. Over time, the loop will have to lubricate a special tool.

3. Broken light bulb

Broken bulb in the cartridge.

Unscrew the broken bulb from the cartridge will help half of the potato. The shards sink deeply into the root and the light bulb can be easily unscrewed without hurting your hands.

4. Traces of nails

Holes and traces of nails.

Minor flaws, marks and nail holes can be masked with pastel chalk in the color of the wall.

5. Protection of small parts

Painting tape when painting.

Do not be lazy to stick small parts with masking tape. Do this even if the area you are going to paint is very small, protect nearby surfaces with scotch tape. Otherwise, then you have to paint them.

6. Downed screws

Unscrew knocked screw.

If the screwdriver slips all the time and is not fixed in the damaged screw head or screw, use auxiliary material. For example, a strip of thin rubber or foam rubber. This will provide a better grip on the cap with a screwdriver.

7. Fixing the lock

Fixing the tongue of the castle.

Tie a ribbon of eight on the door handle to secure the tongue of the lock. This will not allow the door to slam, help to avoid noise and protect children who are alone in the room.

8. Fixing screws

Secure screws and bolts.

To the screws, screws and screws held better, lubricate their feet with clear nail polish. In this situation, the lacquer will act as glue and will provide a secure fit.

9. Seam cleaning

Effective cleaning of seams.

To clean the joints between the tiles, use a toilet bowl disinfectant. Put means on joints and leave for 15 minutes. After a time, rub the areas with a brush.

10. Rusty tool

Reanimate rusty tool.

A hard sponge and white vinegar will help clean the metal tool. Such a tool can be a worthy alternative to expensive chemistry.

11. Noise protection

Silent door.

Glue a small piece of rubber cloth to the door in the vicinity of the castle so that the door does not slam and does not create excessive noise.

12. Paint brushes

Cleaning paint brushes.

If you do not have a special tool for cleaning brushes after painting, use vinegar. To do this, you need to heat it, and then soak the brushes in it.

13. Castle

Grease the lock.

Graphite is an excellent lubricant for pin locks. Therefore, if your door lock began to jam, use an ordinary pencil. To do this, sharpen it so that the tip peeps out by 1-2 centimeters, put it in a keyhole and break it off. After that, insert a key into the keyhole and crush graphite with translational movements.

14. Wooden surfaces

Masking scratches on wood.

Disguise scratches and small flaws on the tree will help ordinary walnut. Rub the damaged areas with the core and there will be no trace of scratches.

Video Bonus:

Pin
Send
Share
Send
Send